나트륨 CMC 속성

나트륨 CMC MSDS

Carboxymethyl cellulose

나트륨 CMC C화학적 특성, 용도, 생산

순도시험

  (1) 액성 : 이 품목 0.5g을 취하여 물 50mL에 저으면서 조금씩 가하고 60～70℃에서 가끔 섞어주면서 20분간 가온한 다음, 냉각 후 상징액을 시험용액으로 하여 pH측정법에 따라 시험할 때, pH는 6.0～8.5이어야 한다.  (2) 염화물 : 이 품목 0.1g에 물 20mL 및 과산화수소 0.5mL를 가하여 수욕 중에서 30분간 가열하고 식힌 다음 물을 가하여 100mL로 하고 건조된 여지를 사용하여 여과시킨다. 여액 25mL를 취한 다음 이를 시험용액으로 하여 염화물시험법에 따라 시험할 때, 그 양은 0.01N 염산 0.45mL에 대응하는 양 이하이어야 한다.  (3) 황산염 : 순도시험 (2)에서 얻은 여액 20mL를 취한 다음 이를 시험용액으로 하여 황산염시험법에 따라 시험할 때, 그 양은 0.01N 황산 0.4mL에 대응하는 양 이하이어야 한다.  (4) 비소 : 이 품목을 비소시험법에 따라 시험할 때, 그 양은 4.0ppm 이하이어야 한다.  (5) 납 : 이 품목 5.0g을 취하여 원자흡광광도법 또는 유도결합플라즈마발광광도법에 따라 시험할 때, 그 양은 2.0ppm 이하이어야 한다.  (6) 카드뮴 : 이 품목 5.0g을 취하여 원자흡광광도법 또는 유도결합플라즈마발광광도법에 따라 시험할 때, 그 양은 1.0ppm 이하이어야 한다.  (7) 수은 : 이 품목을 수은시험법에 따라 시험할 때, 그 양은 1.0ppm 이하이어야 한다.

확인시험

  (1) 이 품목 1g에 물 100mL를 가하여 잘 저어 섞어서 균등한 풀처럼 될 때까지 방치하고 이를 시험용액으로 하여 다음의 시험을 한다.    ① 시험용액에 물을 가하여 5배로 희석하고 그 중 1방울에 크로모트로프산시액 0.5mL를 가하여 수욕 중에서 10분간 가열하면 홍자색을 나타낸다.    ② 시험용액 5mL에 아세톤 10mL를 가하여 잘 흔들어 섞으면 백색의 솜모양의 침전이 생긴다.    ③ 시험용액 5mL에 황산동용액(1→20) 5mL를 가하여 흔들어 섞으면 엷은 청색의 솜모양 침전이 생긴다.  (2) 이 품목 1g을 550～600℃에서 3시간 강열시켜 얻은 잔류물은 확인시험법 중 나트륨염의 반응을 나타낸다.

화학적 성질

Carboxymethylcellulose sodium occurs as a white to almost white, odorless, tasteless, granular powder. It is hygroscopic after drying.

용도

In drilling muds, in detergents as a soil-suspending agent, in resin emulsion paints, adhesives, printing inks, textile sizes, as protective colloid in general. As stabilizer in foods. Pharmaceutic aid (suspending agent; tablet excipient; viscosity-increasing agent).

정의

A semisynthetic, water-soluble polymer in which CH 2 COOH groups are substituted on the glucose units of the cellulose chain through an ether link- age. Mw ranges from 21,000 to 500,000. Since the reaction occurs in an alkaline medium, the prod- uct is the sodium salt of the carboxylic acid R-O- CH 2 COONa.

생산 방법

Alkali cellulose is prepared by steeping cellulose obtained from wood pulp or cotton fibers in sodium hydroxide solution. The alkaline cellulose is then reacted with sodium monochloroacetate to produce carboxymethylcellulose sodium. Sodium chloride and sodium glycolate are obtained as by-products of this etherification.

일반 설명

Sodium carboxymethyl cellulose (CMC) belongs to the class of anionic linear structured cellulose. Its components consist of polysaccharide composed of fibrous tissues of plants. It is a water soluble polymer which can be used as a polyelectrolyte cellulose derivative.

Pharmaceutical Applications

Sodium carboxymethyl cellulose (NaCMC) is the sodium salt of carboxymethyl cellulose, an anionic derivative.It is widely used in oral and topical pharmaceutical formulations, primarily for its viscosity-increasing properties. Viscous aqueous solutions are used to suspend powders intended for either topical application or oral and parenteral administration. Carboxymethylcellulose sodium may also be used as a tablet binder and disintegrant, and to stabilize emulsions.
Higher concentrations, usually 3–6%, of the medium-viscosity grade are used to produce gels that can be used as the base for applications and pastes; glycols are often included in such gels to prevent them drying out. Carboxymethylcellulose sodium is also used in self-adhesive ostomy, wound care, and dermatological patches as a muco-adhesive and to absorb wound exudate or transepidermal water and sweat. This muco-adhesive property is used in products designed to prevent post-surgical tissue adhesions; and to localize and modify the release kinetics of active ingredients applied to mucous membranes; and for bone repair. Encapsulation with carboxymethylcellulose sodium can affect drug protection and delivery. There have also been reports of its use as a cyto-protective agent.
Carboxymethylcellulose sodium is also used in cosmetics, toiletries, surgical prosthetics, and incontinence, personal hygiene, and food products.

Safety Profile

Mildly toxic by ingestion. Experimental reproductive effects. Questionable carcinogen with experimental neoplastigenic data. It migrates to food from packagmg materials. When heated to decomposition it emits toxic fumes of NazO. See also POLYMERS, SOLUBLE.

Safety

Carboxymethylcellulose sodium is used in oral, topical, and some parenteral formulations. It is also widely used in cosmetics, toiletries, and food products, and is generally regarded as a nontoxic and nonirritant material. However, oral consumption of large amounts of carboxymethylcellulose sodium can have a laxative effect; therapeutically, 4–10 g in daily divided doses of the medium- and high-viscosity grades of carboxymethylcellulose sodium have been used as bulk laxatives.
The WHO has not specified an acceptable daily intake for carboxymethylcellulose sodium as a food additive since the levels necessary to achieve a desired effect were not considered to be a hazard to health. However, in animal studies, subcutaneous administration of carboxymethylcellulose sodium has been found to cause inflammation, and in some cases of repeated injection fibrosarcomas have been found at the site of injection.
Hypersensitivity and anaphylactic reactions have occurred in cattle and horses, which have been attributed to carboxymethylcellulose sodium in parenteral formulations such as vaccines and penicillins.
LD₅₀ (guinea pig, oral): 16 g/kg
LD₅₀ (rat, oral): 27 g/kg

저장

Carboxymethylcellulose sodium is a stable, though hygroscopic material. Under high-humidity conditions, carboxymethylcellulose sodium can absorb a large quantity (>50%) of water. In tablets, this has been associated with a decrease in tablet hardness and an increase in disintegration time.
Aqueous solutions are stable at pH 2–10; precipitation can occur below pH 2, and solution viscosity decreases rapidly above pH 10. Generally, solutions exhibit maximum viscosity and stability at pH 7–9.
Carboxymethylcellulose sodium may be sterilized in the dry state by maintaining it at a temperature of 1608℃ for 1 hour. However, this process results in a significant decrease in viscosity and some deterioration in the properties of solutions prepared from the sterilized material.
Aqueous solutions may similarly be sterilized by heating, although this also results in some reduction in viscosity. After autoclaving, viscosity is reduced by about 25%, but this reduction is less marked than for solutions prepared from material sterilized in the dry state. The extent of the reduction is dependent on the molecular weight and degree of substitution; higher molecular weight grades generally undergo a greater percentage reduction in viscosity. Sterilization of solutions by gamma irradiation also results in a reduction in viscosity.
Aqueous solutions stored for prolonged periods should contain an antimicrobial preservative.
The bulk material should be stored in a well-closed container in a cool, dry place.

Purification Methods

Dialyse it for 48hours against distilled water and freeze-dry if a solid is required.

비 호환성

Carboxymethylcellulose sodium is incompatible with strongly acidic solutions and with the soluble salts of iron and some other metals, such as aluminum, mercury, and zinc. It is also incompatible with xanthan gum. Precipitation may occur at pH < 2, and also when it is mixed with ethanol (95%).
Carboxymethylcellulose sodium forms complex coacervates with gelatin and pectin. It also forms a complex with collagen and is capable of precipitating certain positively charged proteins.

Regulatory Status

GRAS listed. Accepted as a food additive in Europe. Included in the FDA Inactive Ingredients Database (dental preparations; intraarticular, intrabursal, intradermal, intralesional, and intrasynovial injections; oral drops, solutions, suspensions, syrups and tablets; topical preparations). Included in nonparenteral medicines licensed in the UK. Included in the Canadian List of Acceptable Nonmedicinal Ingredients.

나트륨 CMC 준비 용품 및 원자재

원자재

준비 용품

나트륨 CMC 공급 업체

공급자	전화	이메일	국가	제품 수	이점
Changshu Wealthy Science and Technology Co.,Ltd,	+8613706216163	baizhou@weiyichem.com	China	1	58
ZhenYiBio Technology Inc	+8615309206328	alexxue@zhenyibio.com	China	299	58
Hebei Dangtong Import and export Co LTD	+8615632927689	admin@hbdangtong.com	China	991	58
Hebei Saisier Technology Co., LTD	+86-18400010335 +86-13102810335	admin@hbsaisier.cn	China	747	58
Yujiang Chemical (Shandong) Co.,Ltd.	+86-17736087130 +86-18633844644	catherine@yjchem.com.cn	China	147	58
Hebei Mojin Biotechnology Co., Ltd	+8613288715578	sales@hbmojin.com	China	12456	58
Hebei Guanlang Biotechnology Co,.LTD	+8619930503252	daisy@crovellbio.com	China	5964	58
Hebei Jingbo New Material Technology Co., Ltd	+8619931165850	hbjbtech@163.com	China	1000	58
Shandong Juchuang Chemical Co., LTD	+86-18885615001 +86-18885615001	admin@juchuangchem.com	China	387	58
airuikechemical co., ltd.	+undefined86-15315557071	sales02@airuikechemical.com	China	994	58

나트륨 CMC 관련 검색: